What type of plant requires registration? Schedule 5 (Part 2) of the Work Health and Safety Regulation 2011 (WHS Regulation). Serially produced vessels. Serially produced vessels. To find out if you are required to register pressure vessels within an air conditioning unit, you should seek technical advice from your air conditioner supplier or service agent.

Description:Specifies requirements for a method of manufacture of serially produced metallic and non-metallic unfired having a maximum volume of 150 L, and specified limits, related to the vessel contents, on the product of the design pressure and the total vapour space. For such vessels, this method of manufacture based on type testing provides an alternative to the method given in AS 1210, SAA Unfired Pressure Vessels Code.

Burst tests and other performance tests on a significant number of representative samples are used to validate design, materials, and fabrication, all simultaneously. Catalog:Document Contents AS 2971-1987 SERIALLY PRODUCED PRESSURE VESSELS PREFACE CONTENTS SECTION 1. SCOPE AND GENERAL 1.1 SCOPE. 1.2 REFERENCED DOCUMENTS. 1.3 DEFINITIONS. 1.3.1 Unfired pressure vessel 1.3.2 Serially produced vessels 1.3.3 Batch 1.3.4 Design pressure 1.3.5 Design temperature 1.3.6 Design minimum temperature 1.3.7 Corrosion 1.3.8 Manufacturer 1.3.9 Inspecting Authority 1.3.10 Shall and should 1.3.11 Approved and approval 1.4 CLASSIFICATION OF VESSELS.

1.5 DESIGNATION. 1.6 APPLICATION OF CLASSES OF VESSELS. MATERIALS, DESIGN, AND MANUFACTURE 2.1 MATERIALS. 2.2.1 General.

2.2.2 Design pressure. 2.2.3 Crevices. 2.2.4 Cleaning access. 2.2.5 Inspection openings. 2.2.6 Closures. 2.2.7 Drains.

2.3 MANUFACTURE. 2.4 PROTECTIVE DEVICES AND FITTINGS. 2.4.1 Fittings. 2.4.2 Pressure-relief devices. 2.5 CORROSION PROTECTION. PERFORMANCE REQUIREMENTS 3.1 GENERAL.

3.2 RESISTANCE TO INTERNAL PRESSURE. 3.3 RESISTANCE TO BURSTING AND FRAGMENTATION.

3.4 RESISTANCE TO FATIGUE. 3.5 RESISTANCE TO DROPPING. 3.6 RESISTANCE TO PENETRATION. 3.7 RESISTANCE TO IMPACT. 3.8 RESISTANCE TO TORQUE.

3.10 RESISTANCE TO CORROSION. 3.11 PRESSURE RELIEF. 3.11.1 Pressure- or similar device. 3.11.2 Rupture member 3.11.3 Fusible plug. 3.11.4 Required discharge capacity.

3.12 MARKING PLATE ADHESION. 3.13 SURFACE QUALITY AND CONFORMANCE. 3.14 OTHER PERFORMANCE CHARACTERISTICS.

MARKING AND INSTRUCTIONS 4.1 MARKING. 4.1.1 Marks required. 4.1.2 Method of marking. 4.1.3 Location of marks. 4.1.4 Type of marks. 4.2 INSTRUCTIONS. ASSESSMENT OF COMPLIANCE WITH PERFORMANCE REQUIREMENTS OF THIS STANDARD 5.1 GENERAL.

5.2 WITNESSING OF TYPE TESTS. 5.3 REPORT OF TYPE TESTING. 5.4 MANUFACTURER'S DATA REPORT. 5.5 INSPECTION OF MANUFACTURER'S FACILITIES.

5. Filemaker Pro Advanced 13 Trial on this page. 6.1 Retest after failure of a type test. 5.6.2 Retests after failure of a production test. 5.6.3 Modification. APPENDIX A - INFORMATION TO BE SUPPLIED BY THE PURCHASER AND THE MANUFACTURER A1 INFORMATION TO BE SUPPLIED BY THE PURCHASER.

A2 INFORMATION TO BE SUPPLIED BY THE MANUFACTURER TO THE INSPECTING AUTHORITY TO OBTAIN D. APPENDIX B - PROOF PRESSURE TEST B1 SCOPE. B2 PRESSURIZING MEDIUM. B3 STATE OF VESSEL.

B4 PROCEDURE. APPENDIX C - BURST AND FRAGMENTATION TEST C1 SCOPE. C2 PRESSURIZING MEDIUM.

C3 TEST SAMPLE. C4 TEST TEMPERATURE. C5 PREPARATION FOR THE TEST. C6 PROCEDURE. C6.1 General. C6.2 Safety precautions.

APPENDIX D - FATIGUE TEST D1 SCOPE. D2 PRESSURIZING MEDIUM. D3 TEST SAMPLE. D4 PROCEDURE.

APPENDIX E - DROP TEST E1 SCOPE. E2 APPARATUS. E3 TEST SAMPLES. E4 TEST TEMPERATURE. E5 PREPARATION FOR THE TEST.

E6 PROCEDURE. E6. Acars Software. 1 General. E6.2 Safety precautions. APPENDIX F - PENETRATION TEST F1 SCOPE. F2 APPARATUS.

F3 TEST SAMPLES. F4 TEST TEMPERATURE. F5 PREPARATION FOR THE TEST.

F6 PROCEDURE. F6.1 General. F6.2 Safety precautions. APPENDIX G - IMPACT TEST G1 SCOPE. Gypsy Original Broadway Cast Rarest on this page. G2 APPARATUS. G3 TEST SAMPLES.

G4 TEST TEMPERATURE. G5 PREPARATION FOR THE TEST. G6 PROCEDURE. G6.1 General. G6.2 Safety precautions.

APPENDIX H - CORROSION TESTS H1 SCOPE. H2 APPLICATION. H2.1 Salt spray test. H2.2 Brass-cracking test. H3 SALT SPRAY TEST. H4 BRASS-CRACKING TEST. APPENDIX J - PRESSURE-RELIEF DEVICE TESTS J1 SCOPE.